QY16K Truck Crane
QY16K Truck Crane is advanced product with 6 designs won China state patents.
Full-width driver’s cab is spacious, bright and comfortable.
D6114ZLQ5B engine comply with emission standard of EuroⅡ
Hydraulic pilot proportional control makes precious lifting operation.
Integrated and modular designed control components, little energy loss and high efficiency.
3-section telescopic boom has all-round hexagonal cross-section. Telescopic mechanism of single cylinder plus wire ropes maximizes load lifting capacity.
Jib with three kinds of offset angle and an additional single top enlarge working range.
Well-equipped safety devices, such as automatic moment limiter, hoist limit switch, over-wind and over-release cut-out devices conform to China compulsory standard.
Dual independent winch system. Swing system with free-sliding function can realize load automatically sliding to position.
Operator’s cab with adjustable seat, air conditioner and heater for option, convenient for operation.
The vehicle, equipped with devices for use in plateau, suits many kinds of working environment.
Main Technical Specifications
Main Technical Specifications
Technical Data for Lifting Operation
| Classificatory |
Item |
Unit |
Parameter |
Outline dimension |
Overall length |
mm |
11810 |
Overall width |
mm |
≤2500 |
Overall height |
mm |
3170 |
Wheel base |
Axle 1, Axle 2 |
mm |
4025 |
Axle 2, Axle 3 |
mm |
1350 |
Track |
Front wheel |
mm |
2079 |
Rear wheel |
mm |
1834 |
Mass |
Total mass in travel state |
kg |
21540 |
Axle load |
Axle 1 |
kg |
6300 |
Axle 2 |
kg |
15100 |
Travel performance |
Travel speed |
Max. travel speed |
km/h |
≥69 |
Min. stable travel speed |
km/h |
≤2.8 |
Turning diameter |
Min. turning diameter |
m |
≤21 |
Min. turning diameter at boom tip |
m |
≤24 |
Min. ground clearance |
mm |
≥260 |
Approach angle |
(°) |
≥16 |
Departure angle |
(°) |
≥14 |
Braking distance (at 30km/h with full load) |
m |
10 |
Max. grade-ability |
％ |
≥32 |
Fuel consumption for 100km |
L |
30 |
Main Technical Data for Lifting Operation
| Classificatory |
Item |
Unit |
Parameter |
Lifting performance |
Max. total rated lifting capacity |
t |
16 |
Min. rated working radius |
m |
3 |
Turning radius at turntable tail |
m |
≤2.765 |
Max. load moment |
Base boom |
kN.m |
711.48 |
Fully extended boom |
kN.m |
449.8 |
Fully extended boom + Jib |
kN.m |
327.7 |
Outrigger span |
Longitudinal |
m |
4.68 |
Lateral |
m |
5.4 |
Lifting height |
Base boom |
m |
≥10.17 |
Fully extended boom |
m |
≥24.7 |
Fully extended boom + Jib |
m |
≥32.3 |
Boom length |
Base boom |
m |
10 |
Fully extended boom |
m |
24.2 |
Fully extended boom + Jib |
m |
32.35 |
Working speed |
Boom raising time |
s |
≤50 |
Boom full extension time |
s |
≤73 |
Max. swing speed |
r/min |
≥2.1 |
Hoist speed |
Main winch |
Full load |
m/min |
≤82 |
No load |
m/min |
≤100 |
Aux. winch |
Full load |
m/min |
≤72 |
No load |
m/min |
≤100 |
Noise limit |
Crane exterior noise |
dB (A) |
≤118 |
At seated position |
dB (A) |
≤90 |
